How to plumb a toilet waste pipe?

How to plumb a toilet waste pipe?
Plumbing a toilet waste pipe may seem like a daunting task, but with the right tools and a bit of knowledge, it can be done by any DIY enthusiast. In this guide, we'll take you through the steps to plumb a toilet waste pipe in the UK.

What You'll Need:

  • Toilet

  • Toilet waste pipe

  • Soil pipe connector

  • Hacksaw

  • Measuring tape

  • PVC glue

  • Pipe clips

  • Adjustable wrench

Step 1: Measure the Distance The first step in plumbing a toilet waste pipe is to measure the distance from the toilet to the soil pipe connector. This will determine the length of the waste pipe that you'll need.

Step 2: Cut the Waste Pipe Using a hacksaw, cut the waste pipe to the correct length. Make sure to cut the pipe as straight as possible to ensure a secure connection.

Step 3: Connect the Soil Pipe Connector Insert the soil pipe connector into the existing soil pipe. Make sure that it's firmly in place and secure it with pipe clips. The connector should be at the correct height for the toilet waste pipe to connect to it.

Step 4: Connect the Waste Pipe to the Toilet Connect the waste pipe to the toilet using the PVC glue. Apply the glue to both the inside of the waste pipe and the outside of the toilet's waste outlet. Slide the waste pipe onto the outlet and hold it in place for a few seconds to ensure a secure connection.

Step 5: Secure the Waste Pipe Secure the waste pipe to the wall using pipe clips. Make sure to leave enough space between the clips so that the pipe can expand and contract with temperature changes.

Step 6: Test for Leaks Turn on the water supply and flush the toilet. Check for any leaks around the waste pipe and soil pipe connector. If you notice any leaks, tighten the connections with an adjustable wrench or apply more PVC glue to the joint.

Step 7: Finish Up Once you're satisfied that there are no leaks, finish up by sealing any gaps between the waste pipe and the floor or wall with silicone sealant.


In addition to the basic steps outlined above, there are a few extra tips and considerations to keep in mind when plumbing a toilet waste pipe in the UK.

Book a plumbing and drainage professional repair

Firstly, it's important to choose the right type of waste pipe for your toilet. In most cases, PVC waste pipes are the most common choice for toilet installations due to their durability and affordability. However, there are other options available, such as copper or steel waste pipes, which may be more suitable for specific situations.

When connecting the waste pipe to the toilet, it's important to ensure a tight and secure connection. Apply a generous amount of PVC glue to both the inside of the waste pipe and the outside of the toilet's waste outlet, and make sure to slide the waste pipe onto the outlet fully. Hold the connection in place for a few seconds to ensure the glue sets and creates a strong bond.

Another key consideration is the angle of the waste pipe. The waste pipe should be sloped downwards at a slight angle towards the soil pipe connector to ensure that waste flows smoothly and efficiently. A general rule of thumb is to aim for a gradient of around 1:80, or a 12.5mm drop per metre of pipe.

It's also important to secure the waste pipe properly to prevent any movement or vibrations. Use pipe clips at regular intervals to fix the pipe securely to the wall or floor, taking care not to over-tighten the clips and damage the pipe. If the waste pipe runs along an external wall, it may be necessary to insulate the pipe to prevent it from freezing during colder months.

Finally, don't forget to test the installation thoroughly before finishing up. Turn on the water supply and flush the toilet several times to check for any leaks or blockages. Make sure that the toilet waste pipe is draining properly into the soil pipe connector and that there are no leaks at any of the connections.

Get a plumbing and drainage cover

In conclusion, plumbing a toilet waste pipe in the UK is a task that can be undertaken by any DIY enthusiast with the right tools and knowledge. By following the basic steps outlined above, as well as some additional tips and considerations, you can install a toilet waste pipe that is secure, efficient, and built to last. However, if you're unsure about any aspect of the installation process or encounter any problems, it's always best to seek the help of a professional plumber to ensure a safe and effective installation. With your new toilet waste pipe installed, you can enjoy a fully functional and comfortable bathroom for years to come.

Unlock the mysteries of your home's heating system with our informative blog on "How Does a Boiler Work." We provide a detailed exploration of the inner workings, explaining the process from heating the water to distributing warmth throughout your home. Whether you're a homeowner or simply curious about household mechanics, our guide breaks down the essential components and functions of a boiler.